Beacon Receiver YT-D-01

Beacon Receiver

Model:YT-D-01

Product Features:

  • Amplitude (Max.) tracking
  • Built-in power divider
  • Adjustable capture width
  • Beacon recognizing function (single wave)
  • USB interface
  • LNB power supply

Product Overview:

Model YT-D-01 Beacon Receiver has the features like wide band width, high sensibility and big dynamic range etc. It is mainly used to demodulate the satellite signals down converted to L band from C, Ku and Ka bands. AGC voltage and Lock Signal can be demodulated and offered to ACU, controlling the antenna to point to the satellite accurately.

This model adopts the most advanced technology, and it has small size, high performance, low cost and can be used widely. It also has great extendibility in functions; the RCA interface can be either extended two channels or added an emitting channel. And it also can be used as a BD receiver.

This model is mainly used in satellite communications, such as SOTM, Take-away Antenna, Satellite Ground Station, Emergency Communication and TVRO etc.

Technical Specifications:

  1. Input Frequency: 950MHz~2200MHz
  2. Input Power: -90~-50dBm
  3. Detectable Signal-to-noise Rate: C/ N0≤46dBc/Hz
  4. Step Frequency: 1KHz
  5. Capture Width: 25KHz, 50KHz, 100KHz and 200KHz
  6. Capture Time: ≤3ms
  7. Tracking slope: 5dB / V（Adjustable 0.1~2.0, Step 0.1）
  8. Index electrical level: 0~10V
  9. Working : -20℃~+70℃(optional:-40℃~+85℃)
  1. Input Power: +12~+27V DC
  2. Power consumption: 3W
  3. Weight: ≤200g
  4. Interfaces:

RCA: SMA_K

Analog Interface: AGC 0~10V Lock Signal: TTL

Servo Interface: RS232 Remote Interface: RS232 USB

  1. Functions:

Analog beacon signal output LNB power supply (+15V) Satellite beacon lock index

Interfaces:

  • Analog Interface:

XS01 (RF_IN): SMA_K, 50Ω, RCA (950MHz~2200MHz)

Note: when the pins (No. 11 and 12) of the DB15 connector are short-circuited, there is

+15V DC output from the XS01. If not short-circuited, then not.

XS02 (NC): Reserved

  • Digital Interface: XS04 (DATA): DB15

Interface Definition:

Pin S/N

Pin Definition

Pin Description

1

POWER

 

Input power (+12~+27V DC)

2

POWER

3

GND

 

Power END

4

GND

 

 

5

 

 

Uamp

Signal amplitude voltage output AGC voltage output range: 0~10V

AGC slope: 0.1~2.0, Step 0.1

6

LOCKED

Tracking lock index (TTL)

7

TXD1

 

RS232 Servo communication

8

RXD1

9

TXD2

 

RS232 Remote control

10

RXD2

11

NC

Suspended

When the pins (No. 11 and 12) of the DB15 connector are

short-circuited, there is +15V DC output from the XS01. If not

short-circuited, then not.

 

 

12

 

 

NC

 

 

Suspended

13

GND

END

14

NC

Suspended

15

NC

Suspended