Beacon Receiver YT-B-01
Beacon Receiver
Model:YT-B-01
Product Features:
- Beacon tracking
- Amplitude (Max.) tracking
- Highly integrated
- Adjustable capture width
- Capture time: 3ms
- High extendibility
Product Overview:
Model YT-B-01 Beacon Receiver is integrated in one board, which has the features like wide band width, high sensibility and big dynamic range etc. It is mainly used to demodulate the satellite signals down converted to L band from C, Ku and Ka bands. AGC voltage and Lock Signal can be demodulated and offered to ACU, controlling the antenna to point to the satellite accurately.
This model adopts the most advanced technology, and it has small size, high performance, low cost and can be used widely. It also has great extendibility in functions; the RCA interface can be either extended two channels or added an emitting channel. And it also can be used as a BD receiver.
This model is mainly used in satellite communications, such as SOTM, Take-away Antenna, Satellite Ground Station, Emergency Communication and TVRO etc.
Technical Specifications:
| 1 | Input Freuqncy:950MHz~2200MHz |
| 2 | Input Power: -90~-50dBm |
| 3 | Min. Detectable Signal-to-noise Rate: C/ N0≤46dBc/Hz |
| 4 | Step Frequency: 1KHz |
| 5 | Capture Width: 25KHz, 50KHz, 100KHz and 200KHz |
| 6 | Capture Time: ≤3ms |
| 7 | Working Temp.: -20℃~+70℃, (Optional:-40℃~+85℃) |
| 8 | Input Power (DC): +5V/0.6A or +15V/0.01A |
| 9 | Interfaces: MCX1 (RF_IN): RCA MCX2 (NC): Reserved Analog Interface: AGC 0~10V Lock Signal: TTL Servo Interface: RS232 Remote Interface: RS232 |
Interfaces:
- Analog Interface:MCX1 (RF_IN): RCA (950MHz~2200MHz)
Note: when the pins (No. 13 and 14) of the female connector are short-circuited, there is
+15V DC output from the MCX1. If not short-circuited, then not.
MCX2 (NC): Reserved
- Digital Interface:2.0 Pitch female connector (DATA): CB74142V100
Interface Definition:
| Pin S/N | Pin Definition | Pin Description | |
| 1 | +5V-A | Input power +5V, for digital circuit | |
| 2 | TXD1 | RS232 Servo communication | |
| 3 | +5V-B | Input power +5V, for analog circuit | |
| 4 | RXD1 | RS232 Servo communication | |
| 5 | GND | END | |
| 6 | TXD2 | RS232 Remote control | |
| 7 | Uamp | Signal amplitude voltage output AGC voltage output range: 0~10V | |
| AGC slope: 0.1~2.0, Step 0.1 | |||
| 8 | RXD2 | RS232 Remote control | |
| 9 | LOCKED | Tracking lock index (TTL) | |
| 10 | +15V | Input powor+15V, for amplifier | |
| 11 | GND | END | |
| 12 | GPIO | Reserved interface | |